|
 |
|
|
|
|
|
|
Introduction
MPL 808 extends the range of MPL 600-style switches with snap action in an all-metal housing, designed for moderately higher pressures. Actuation may be specified between 10 psi and 250 psi.
Description
The MPL 808 utilizes a sensor body die cast of aluminum-zinc alloy, with a 1/8" NPT fitting. Like the 600 Series, the MPL 808 is diaphragm operated. Diaphragm material can be selected for the operating medium, temperature range, and other factors. During development of a specification, actuation point can be adjusted by the OEM designer. In production, factory setting is required.
Specifications
Body: aluminum-zinc alloy
Diaphragm: polyurethane standard, other materials available
Snap Switch: UL & CSA listed, wide selection
Operating Temperature: -40 to +85C, (-40 to +185F), depending on components. Consult factory.
Pressure: 10 psi to 250 psi
Burst: 500 psi
Form: SPDT
Terminals: Three 0.020" x 0.187" male tabs standard. Three 0.032" x 0.250" available. Special OEM terminals available.
Dimensions: 2.0 x 2.0 x 1.0 inch
Weight: 2 ounces (57 grams)
Electrical
The MPL 808 incorporates standard high reliability snap action switches. Depending on pressure setting, ratings are available from 3A to 25A, and 0.1HP to 1.0HP. Special contacts are available for low current applications.
Actuation Settings
MPL 800 pressure models are available from 10 to 250 psi. Tolerance is typically +/- 10% of setpoint. |
|
|
|
|
